gototopgototop
  1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer>

Pioneer 300 Advanced Kit

0

The delivery of the Advanced Assembly Kit foreseen the supply of all required material to build the Pioneer 300 including the white paint of the aircraft.
The customer will not find the following material: Engine and Accessories; Instruments; Propeller; and lining.
- Assembled fuselage framework.

- Sound proof material for cockpit sound-proofing.

- Central pre-cut console.

- Seat and backrest frames.
23

24
- Assembled half wings.

- Assembled ailerons and flaps.
25

26
- Half-wing jointing plates.

- Several sized pine stringers.

- Pre-cut Birch plywood sheets.
27

28
- Ailerons and flaps pre-cut sheets.
29
- Assembled tail fin.

- Pre-cut tail fin plywood sheets.

- Assembled elevator.

- Elevator pre-cut plywood sheets.

- Stabilizer in composite material with white “GELCOAT” finished (wings, ailerons flaps, elevators and rudder are already pre-drilled to install hinges and devices properly).
30
- Rotax mod. 912 White engine mounting.

- White painted nose gear and wheel.

- Gelcoat finishing white cowlings.

- White painted fiberglass propeller dish and spinner.

- Painted clamps to assembly engine mounting to firewall.

- #2 wing tanks (40 L each)).

- Electrical televel.

- Tank caps.

- Fuel Connectors (nipples) and piping (tubing).

NOTE: In some European Countries, the aircraft is supplied with a central fuel tank (54L) instead of 2 wing tanks.
31

32
- Painted footrest with plastic (polizene) support.

- Painted control bar with plastic (polizene) supports.

- Non-painted pre-cut metal sheet, as insturment panel, and central console.
33
- Wires kit.

- Rudder and elevators hinges kit.
7
- Painted Sliding Composite cockpit frame.

- Transparent pre-cut canopy glasses.

- Canopy sliding device: c-guides and pulleys.

- Main landing gear set and fastening.

- Main wheels provided with disc brake and pincers.

- Hydraulic pump and piping (tubing), connectors (nipples) and brake fluid.
35

13

14
- Pitot tube device and piping (tubing).
15
- Bellcranks.

- push-pull tubes.

- hinges.
16
- Elevator bellcranks push-pull tubes and stabilizer clamps.
17

17a
- Flap motor and push-pull tube set and hardware.
18
- Pre-set Main Landing Gear System ready to be installed into fuselage: Electric motor and emergency handle.
19
- Nose and Main Landing Gear wells.

- Wing ends.

- Tail cone.
20
- Carbon Composite fuselage shell set for fuselage covering.
22
- Wooden glue set.

- Fabric glue.

- Wooden preservative.

- Plaster.

- Primer for fabric.

- White paint.

- Epoxy resins.
21
The kit is inclusive of all hardware necessary for the aircraft assembly and DACRON fabric to cover it. Furthermore:

- Electrical cable sheaths.

- Electrical retracting system device.

- Trim actuator motor.

- Texts and decals adhesive set.

NOTE:

- All metal materials are supplied already painted with white base powders; aluminium ones are oxidation-proof. Some of metallic parts are hot-zinc treated. All composite parts are ‘Gelcot’ finished.
Documents included:
- Complete set of assembly sketches.
- Part Number list.
- Assembly handbook.
iso-9001-2008-2